“Many problems related to materials are caused by a bad or, even worse, nonexistent after-laying cleaning and a subsequent inadequate maintenance” - Nicola Brunello, Assistance Manager of FILA Surface Care Solutions.
“It happens too frequently, in fact, that the after-laying cleaning is not done, although it is a required operation also in compliance with the UNI floorings standard. In this way the quality and the aesthetics of the surface are compromised and the subsequent maintenance is even more difficult. If an adequate after-laying cleaning is not done, doing only the protective treatment, dirt and laying residues will be fixed permanently onto the surface, ruining it”
Fila proposes a range of specific products for after-laying cleaning according to the type of material and the filler used for the grouting.
FILACR10 is the ideal solution to remove epoxy grout residues. The concentrated detergent is specific for the after-laying wash of floors and walls placed with epoxy grout. Ideal for non-absorbent surfaces such as glazed ceramic, porcelain stoneware and glass mosaics, FILACR10 removes even the aged and most stubborn residues. Thanks to its viscosity, it is perfect for both internal and external vertical walls.
Ideal for professionals of the installation and post-installation, the product is ready for use and does not need to be diluted. Its application is easy: after shaking the can, the product can be applied directly on the surface, taking care that all grout residues are covered. Leave it on for about 30 minutes, then rub the surface with an abrasive sponge. After rinsing accurately, the floor will be perfect, free of grout residues which altered its beauty.
FILACR10 is available in 1-liter jerry cans, to treat from 2 to 4 square meters of surface. It must not be used on absorbent materials, wood and methacrylate surfaces.
